Skip to content

Pakistan units

Marla, kanal and acre converter with your own marla size

In revenue records 1 marla is 272.25 square feet (30.25 square yards) and 1 kanal is 20 marla, 5,445 square feet; 1 acre is 8 kanal or 43,560 square feet. Some private schemes use a 225 square foot marla, so this converter lets you choose or type the marla your document uses.

  • Runs in your browser
  • Nothing uploaded
  • Free, no sign-up
  • No ads

UnitEquals

Plot size from length and width

How to convert marla, kanal and acre

  1. Enter the area. Type the number you have and choose its unit, for example 7 marla or 2,400 square feet.
  2. Choose the marla. Pick the revenue marla (272.25 sq ft) or the 225 sq ft marla, or type the size your registry or scheme uses.
  3. Read all units at once. The table shows the same area in every unit. The sentence above it gives kanal and marla together.
  4. Check a plot. To turn dimensions into area, enter length and width in feet below the table.

The units, defined

UnitSquare feetSquare yardsNotes
Sarsai (sarsahi)30.253.36111/9 of a marla; 5.5 ft x 5.5 ft
Marla (revenue)272.2530.251/160 acre; equal to a square rod (perch)
Marla (many private schemes)22525Varies by scheme: follow your document
Kanal5,44560520 marla (revenue); 4,500 sq ft if the marla is 225
Acre43,5604,8408 kanal or 160 marla (revenue); 4,046.86 sq m
Hectare107,639.111,959.910,000 sq m; 2.471 acres

The square foot, yard and acre here use the international foot (0.3048 metre exactly), so 1 square foot is 0.09290304 square metres and 1 acre is exactly 4,046.8564224 square metres. All of this is plain multiplication; the only real ambiguity is the size of the marla.

Why there are two marla sizes

The marla began as a square rod: 16.5 feet by 16.5 feet, which is 272.25 square feet. Under British-era land records it was exactly 1/160 of an acre and 1/20 of a kanal, and that is the figure used in revenue (fard, jamabandi) records across Punjab. Over time, many private housing schemes and developers started selling a "marla" of 225 square feet (25 square yards, a 15 x 15 ft square) because it is a rounder number. The word is the same, the area is not: a 10 marla plot is 2,722.5 sq ft in one convention and 2,250 sq ft in the other, a difference of over 470 square feet.

Always check the square footage written in your document. The sale deed, registry, allotment letter or approved map states the area in square feet or yards. If you are told "10 marla" without a number, ask which marla, or the plot dimensions, before paying.

Quick reference: common plot sizes

PlotSq ft (272.25)Sq yd (272.25)Sq m (272.25)Sq ft if marla is 225
3 marla816.7590.7575.8786675
5 marla1,361.25151.25126.46431,125
7 marla1,905.75211.75177.051,575
10 marla2,722.5302.5252.92852,250
12 marla3,267363303.51422,700
20 marla5,445605505.85714,500
40 marla10,8901,2101,011.719,000

Plot dimensions to marla

Multiply length by width in feet to get the area, then divide by the size of one marla. Typical urban plot shapes, with the number of marlas under each convention:

DimensionsArea (sq ft)Marla at 272.25Marla at 225
25 x 50 ft1,2504.595.56
30 x 40 ft1,2004.415.33
30 x 60 ft1,8006.618
35 x 65 ft2,2758.3610.11
40 x 60 ft2,4008.8210.67
50 x 90 ft4,50016.5320

So a 25 x 50 ft plot is about 4.6 marla in revenue terms but 5.6 marla in a 225 sq ft scheme, which is why it is often advertised as "5 marla". Real plots are rarely exact: the registry area is the figure that counts. In Karachi and Sindh, plots are usually quoted in square yards: 1 kanal is 605 square yards.

How to calculate by hand

  1. Marla to square feet: multiply by 272.25 (or 225 for scheme marla).
  2. Square feet to marla: divide by 272.25.
  3. Kanal to marla: multiply by 20. Marla to kanal: divide by 20.
  4. Square feet to square metres: multiply by 0.09290304.
  5. Acre to kanal: multiply by 8. Acre to square feet: multiply by 43,560.

Common mistakes

  • Mixing the two marla sizes between a seller's advertisement and the registry.
  • Treating "5 marla" as 5 x 225 when the registry area uses 272.25, or the opposite.
  • Converting acres with the "Pakistani acre" idea: a standard acre is 43,560 sq ft; local terms such as killa differ between districts and records, so use the record's own measure.
  • Rounding too early. Keep two decimals on marla until the final figure.
  • Using covered area and plot area interchangeably. A 10 marla plot does not give a 10 marla house on one floor.

This calculator gives arithmetic, not a legal measurement. Disputes are settled by the land record and a surveyor (patwari or licensed surveyor), not by an online tool.

Frequently asked questions

How many square feet are in 1 marla?

In revenue records 1 marla is 272.25 square feet (30.25 square yards, 1/160 acre). Many private housing schemes use 225 square feet instead. Check the area written in your registry or allotment letter.

How many marla are in 1 kanal?

A kanal is 20 marla. At the revenue size that is 5,445 square feet or 605 square yards; with a 225 sq ft marla it would be 4,500 square feet.

How many kanal are in an acre?

One acre is 8 kanal, or 160 marla, which is 43,560 square feet (4,046.86 square metres) when the marla is the revenue marla.

How many marla is a 25 x 50 plot?

25 x 50 ft is 1,250 square feet. That is about 4.59 marla at 272.25 sq ft, or 5.56 marla at 225 sq ft. Sellers often round it to 5 marla.

What is a sarsai?

A sarsai (sarsahi) is one ninth of a marla: 30.25 square feet, a square 5.5 feet on each side.

Which marla should I use for my property?

The one stated in your documents. If a document gives only "marla", ask for the area in square feet or yards, or use the plot dimensions.

Is this converter legally valid?

No. It does the arithmetic with published unit definitions. Official area is whatever the land record, registry or approved plan states.

Sources and how we checked

  • Wikipedia: Marla (unit): marla = 30.25 sq yd = 272.25 sq ft, 1/160 acre and 1/20 kanal under British Raj standards; sarsahi = 1/9 marla; 20 marla = 1 kanal. Wikipedia also gives a figure of about 225 sq ft for the marla, reflecting the variation described above
  • NIST Special Publication 811, Appendix B: international foot = 0.3048 m exactly; acre = 43,560 sq ft = 4,046.8564224 sq m; hectare = 10,000 sq m
  • Housing-scheme 225 sq ft marla: a market practice reported by developers and buyers, not a statutory unit; we did not find an official definition, so confirm with your own documents

Written and maintained by the DanixSoft team in Lahore. Last reviewed 2026-11-22. Spotted a mistake? Write to hello@danixsoft.com.